Air Bubble in the Base of My Spa Pool

If you notice an air bubble trapped under the bottom lining of your spa pool, don't be alarmed — this is an infrequent issue and is easily resolved at home without any tools or specialist assistance.

How to Remove an Air Bubble from the Base of Your Spa Pool

Follow these steps to safely release the trapped air:

1. Empty the spa pool completely and remove all water.

2. Turn the spa pool over so the base is facing upward.

3. Locate the small air-release hole in the base of the spa (refer to the image below).

4. Using your hands, massage the base of the spa toward the hole to guide the air bubble out.

5. Once the air has been released, turn the spa back over and refill as normal.

Note: you can use a vacuum or air pump in suction mode to remove the air from the base of the spa. 

Watch the video below for a step-by-step demonstration: