Water Testing App

Testing your MSpa water is straightforward and can be done using test strips. Here's a step-by-step guide:

1. Turn Off Bubbles: Ensure bubbles are off before testing.
2. Dip Test Strip: Hold horizontally and dip into spa water for a few seconds.
3. Flick Excess Water: Remove excess water from the strip.
4. Compare Colours: Within 10 seconds, compare colors to chart on test strip bottle for pH, Total Alkalinity, and sanitizer levels.
5. Use Higher Readings: If colors fall between ranges, use higher reading for safety.
6. Record Results: Track your water balance over time.
7. Use This App: Get accurate recommendations and precise dosing instructions based on your spa volume.
8. Add Chemicals: Add necessary chemicals, dissolve in water first, wait 24 hours before retesting.